Nikon D80 VBA14001 - SB Upper Case Assembly

- Ａ  ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
#629×2
Pop-up lever A part
Caution
:
Be careful NOT to deform the SB POP-UP switch.
SB upper case (#301)
SB lower case unit
Claw
・
Mount the SB upper case (#301) on the SB lower case unit.
・
Press the pop-up lever A part of the top cover unit, in order to pop the built-in SB up.
・
Tighten two screws (#629).
SB upper case
Caution: Both ends of the SB ash unit are just
inserted in each part without any adhesive.
SB ash unit