- Ａ ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
5． Click "Reference". Select "C:\D80\PTPC" of C drive, and click "OK".
6. Reboot the PC to complete the installation.
If this program is used by the USB interface, installing the USB driver is necessary.
But if the OS is "Windows XP", the driver is already preloaded so it is not necessary to install it.
1. Set the USB of camera to "PTP".
(SETUP menu → USB setting → PTP)
2. Connect the camera and PC by USB cable.
Turn camera ON.
3. "Add New Hardware Wizard" is indicated, and the next "4." screen is automatically displayed.
Procedure for installing USB driver
4. Click "Yes".
To Next Page
Loading...
