Nikon D80 VBA14001 - Sub-PCB Unit

- Ｄ  ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
・
Disconnect the sub-PCB unit (#1002) from the underneath connector of the main PCB.
・
AF-assist illuminator unit (#B325) comes off.
・
Remove two FPCs.
・
Remove four wires.
Sub-PCB unit
Sub-PCB unit (#1002)
・
Unsolder three wires.
・
Disconnect three FPCs from each connector.
・
Take out the screw (#623) and two screws (#640).
#640
#640
#623
Black
Front body FPC unit
Blue
SQ unit
Red
Front body FPC unit
Orange
SQ unit
Black
AF-assist illuminator
Black
AF-assist illuminator
Gray
FG/ID connect spring
Main PCB connector
AF-assist illuminator unit
(#B325)
Main PCB unit (#B1001)
Sub-PCB unit (#1002)