Chapter 16 Connecting to Network
229
Connecting to
PC, Printer, and
Network
Configuring a different folder for each user
By configuring the following setting on the FTP server, the destination folder can be switched in accordance with the
logged-in user. You can register the setting for five FTP servers in the DS-L3 and switch user information by an easy
operation.
1 Open the [Internet Information Services (IIS) Manager] and select the FTP site on the left side pane.
The items that can be executed are displayed in the middle part of the window.
2 Open [FTP Authentication] and enable [Basic Authentication].
After this setting, select the FTP site on the left side pane to display the items that can be executed in the middle part of
the window.
3 Open [FTP Authorization Rule] and click [Add Allow Rule...].
The [Add Allow Authorization Rule] dialog box appears.
4 Select [Specified users], enter the user name, and select the [Read] and [Write] checkboxes in [Permissions].
5 Press the [OK] button to close the [Add Allow Authorization Rule] dialog box.
6 Open [FTP User Isolation], select [User name directory] under [Do not isolate users. Start users in: ], and then
click [Apply].
Close the [Internet Information Services (IIS) Manager].
7 Open [Computer Management] from [Administrative Tools] in [Control Panel], and open [Computer
Management (Local)] – [System Tools] – [Local Users and Groups] – [Users].
8 Double-click the user you want to set to open [Properties] and specify [Home Folder] - [Local Path] in the
[Profile] tab (under the home folder).
Example of setting:
When home folder is set to “C:\DSFTP” and home folder local path of DS-L3 user is set to “C:\DSFTP\DS1”, and
automatic creation of FTP folder on the DS-L3 side is set, the FTP transfer folder becomes
“C:\DSFTP\DS1\FTyymmdd\” (yymmdd: a two-digit number for each).
9 Set the local path of other users to “C:\DSFTP\DS2” or “C:\DSFTP\DS3”.
You can provide a folder for each user.
Upon completion of these settings, close the [Computer Management].
10 Set the user name and password that were set for the FTP server in the DS-L3.
Open the [SETUP MENU: NETWORK] screen and select the desired [SERVER No] in the [EXTERNAL FTP SERVER]
area, and then set the [USER ID] and [PASSWORD].
For details of the setting, see “13.3.2 (2) Registering/changing FTP server settings”.
To Next Page
Loading...
