Nilfisk-Advance Advenger 3400ST User Manual

SCRUB SYSTEM 51Service Manual – Advenger, 2800ST, 3800ST, BR 755, BR 855
a. Install it far enough so that the brushes will contact the commutator when the temporary retaining wires are removed.
Then remove the wires.
b. Fully seat the end cover.
c. Install the through bolts.
d. Seal the retaining wire holes in the end cover with silicone sealant.
Carbon
Brush
Commutator

Nilfisk-Advance Advenger 3400ST Specifications

General

Brand	Nilfisk-Advance
Model	Advenger 3400ST
Category	Floor Machine
Language	English