Programming Functions 90Service Manual – Advenger, 2800ST, 3800ST, BR 755, BR 855
Service Test Mode - ADVENGER / BR 755, 855 (REV)
The service test mode provides time-saving diagnostic tests. You can request that the main controller turn various outputs on and off without
the normally required prerequisite inputs in order to quickly prove whether the output is working or not. The service test mode can also be
used to verify some input signals.
The Service Test Mode is accessed via the Hidden Menus. Enter the program options and then scroll to the Service Test Mode.
Output Tests
Once in service test mode use the control panel switches to request that various outputs are turned on/off.
The LCD provides feedback to let you know that the controller saw your request and is attempting to carry it
out.
Controls
Scrub Deck
Actuator
Controls
Squeegee Lift
Actuator
Controls
Solution
Solenoid
Controls
Vacuum
Contactor
Controls
Detergent
Pump
Controls
Scrub Motor
Contactor
Service Test Mode Switch Operation
To Next Page
Loading...
Need help?
General
