Introduction 10Service Manual – Advenger, 2800ST, 3800ST, BR 755, BR 855
MINIMUM AISLE TURN AROUND RADIUS (TURNING LEFT)
28” deck Advenger / BR 755, 855
and ST
63 inches (1.63 m)
34” deck Advenger / BR 755, 855
and ST
67.5 inches (1.71 m)
Cylindrical Advenger / BR 755, 855 63 inches (1.63 m)
MINIMUM DOOR PASS-THRU WIDTH (SIDE SKIRTS ON, SQUEEGEE OFF)
28” deck Advenger / BR 755, 855
and ST
31 inches (.79 m)
34” deck Advenger / BR 755, 855
and ST
36.5 inches (.93 m)
Cylindrical Advenger / BR 755, 855 32 inches (.81 m)
Transporting The Machine
CAUTION!
Before transporting the machine on an open truck or trailer:
1 Remove the Squeegee Assembly (11) and secure.
2 Tie the machine down securely at the Locations (A) shown in FIGURE 2.
3 Tape and strap all access doors and covers as necessary.
4 In temperatures below freezing, remove all water from the machine and ush with windshield washer uid to prevent damage to
valves and ttings.
5 Do not drive machine onto a ramp grade exceeding 16% (9 degrees) or damage to the machine may occur.
Tie-Down Points
FIGURE 2
To Next Page
Loading...
