Nilfisk-Advance Advenger 3400ST User Manual

Introduction 6Service Manual – Advenger, 2800ST, 3800ST, BR 755, BR 855
* The batteries must be removed from the machine before the machine is scrapped. The disposal of the batteries should be
safely done in accordance with your local environmental regulations.
* Do not use on surfaces having a gradient exceeding that marked on the machine.
* All doors and covers are to be positioned as indicated in the instruction manual before using the machine.
* This machine should only be used and stored indoors..
SAVE THESE INSTRUCTIONS
Related Reference Sources
Nilsk-Advance provides Operator Manuals, Sales literature, Parts Lists, Technical Service Bulletins, and Instruction Sheets on our website www.
advance-us.com for 24/7 availability of information to order parts, operate, troubleshoot, or repair all current production and most pruned machine
models.
For the Advenger and ST please refer to the following documents for additional information:
Parts List - Form Number 56042495
Operation Manual - Form Number 56041735 (English, Spanish)
For the BR 755, 855 please refer to the following documents for additional information:
Parts List - Form Number 56042496
Operation Manual - Form Number 56041738 (Danish, Norwegian, Swedish, Finnish)
Operation Manual - Form Number 56041739 (German, French, Nederlands, Russian)
Operation Manual - Form Number 56041740 (Spanish, Portuguese, Italian, Greek)
Operation Manual - Form Number 56041741 (Estonian, Latvian, Lithuanian, Slovenian)
Operation Manual - Form Number 56041742 (Slovakian, Czech, Polish, Hungarian)
Operation Manual - Form Number 56041743 (English, Turkish)
Curtis Programmer Manual 56043101
TSB US2008-984 Batteries and Chargers
TSB US2008-979 QuiQ Delta-Q Battery Charger Reprogramming Kit 56315732 Instructions
Diagnostic and Service Tools
In addition to a full set of metric and standard tools, the following items are required in order to successfully and quickly perform troubleshooting
and repair of Nilsk-Advance commercial oor cleaning equipment.
1 Laptop computer loaded with current version of EZParts, Adobe Reader, and (preferably cellular) internet access
2 Digital voltmeter (DVM) with DC current clamp
3 Hydrometer
4 Battery load tester for checking 6V batteries
5 Bearing puller
6 Static control wrist strap
7 Set of torque wrenches
8 Hard (printed) copies of service manuals for all regularly serviced machines (available at www.advance-us.com and other Nilsk-Advance
websites)
9 6” section of 1 1/2” PVC pipe with a 1” hole drilled into one side to check vacuum system against 1” lift spec
10 1 1/2” and 2 3/8” drill bit or hole cutter if a Dual Vac Kit is to be installed
Also these tools available from Nilsk-Advance, Inc.:
56407502 Actuator Power Cord Adapter
56205281 Water Lift Gauge
56206921 Timer Bypass Kit (used to bypass timing function when troubleshooting shelf chargers)
56409441 Curtis Handheld Programmer
56409823 Curtis Adapter Cable (Quad Plug)
56315732 Delta-Q QuiQ Onboard Charger Interface Module
56422174 Tire Puller Kit for Drive Wheel Assembly

Nilfisk-Advance Advenger 3400ST Specifications

General

Brand	Nilfisk-Advance
Model	Advenger 3400ST
Category	Floor Machine
Language	English