NIVELCO MultiCONT - Activation (of Devices, Relays and Current Outputs) Selection (of Language, Operation Mode, Etc.)

prw2101a0600p_01  26 / 105
5.1.2. Activation (of devices, relays and current outputs) selection (of language, operation mode, etc.)
Devices on the list may be active ( ) or inactive ( ). Only active devices will be queried. Active relays and current outputs operate according to their configuration,
inactive relays are de-energized while inactive current outputs remain 0 mA.
Relays  18
02: R_IN_2
03: R_IN_3
01: R_IN_1
:
No active relay. R_IN_1 is active
Relays  18
02: R_IN_2
03: R_IN_3
01: R_IN_1
:
Use
to switch between active and inactive relay states.
Selection of the various modes (Relay mode, current output mode, language, etc.) is done similarly.
Language
 43
German
French
Hungarian
Language
 43
French
English
German
Language
 43
French
English
German
After selection, the chosen language is immediately activated.