NIVELCO MultiCONT - DEV Detect

prw2101a0600p_01  35 / 105
5.4.1. DEV detect:
Queries the transmitters via HART line from 0 to 15, and lists them with 1…9, A, B, C, D, E, F tag.
Main menu

01
MultiCONT config Inputs UIM-s
MultiCONT conf.

35
DEV detect EXT detdct
M
No HART device
Scanning HART line
Device: N
Same address
M
No HART device
Deetect DEV
37
2: SEA-360 (07) - - - -
>
SAVE
<
- - - -
1: SPA-440 (01)
Message appears and detection starts N=0...15
MultiCONT found devices with the
same long address. This is an error state
and detection stops.
Return to
by clicking OK
MultiCONT config
(see next page)
No device found
(device list
will remain empty,
)see next page
List of detected devices (Short TAG) Short address in brackets
"OK" "OK" "OK"
"OK"