NIVELCO MultiCONT - User Display; Editing the User Display

prw2101a0600p_01  44 / 105
5.4.5. User Display:
In measuring mode (See chapter 5.10) the user can select a display format besides the display showing the measured data and this can be seen in the user display.
We will receive an error message in the use’s image if:
 Only one device is selected to display double, difference or average.
 In the case of difference or average display for given transmitters, the values or dimensions are different.
5.4.5.1 Editing the user display
Type 6 51
Multiple
Difference
Average
1 PA-380
2EA-8
3PA-6
: S
: S 3 0
: S 3 0
Difference 52
:
1 PA-380
2EA-8
3PA-6
: S
: S 3 0
: S 3 0
Multiple 52
:
1 PA-380
2EA-8
3PA-6
4: SPA-380
: S
: S 3 0
: S 3 0
Average 52
:
SPA-380 65
PV
SV
TV
QV
SPA-380 65
PV
SV
TV
QV
SPA-380 65
PV
SV
TV
QV
Type
User display 63
:
Result of this setting
is shown on the following page.