NIVELCO MultiCONT - 7. HARDWARE PROTECTION OF THE SETTINGS

prw2101a0600p_01  94 / 105
7. HARDWARE PROTECTION OF THE SETTINGS
ON OFF
IC2
S1
C26
For access, loosen the nuts fastening the front panel.
The program protection switch in ON position will prevent modification of parameters
affecting operation such as:
 relay parameters
 current output parameters
 activation of devices
 remote programming
 denying access to the Service menu
 denying permission to run DEV detect, EXT detect under MultiCONT config
The switch does not prevent modifications that do not influence the operation of
the
MultiCONT (such as language, backlight, user image, sorting, restart, etc)