NIVELCO MultiCONT - Configuring Parameters

prw2101a0600p_01  80 / 105
5.7.3.3 Configure parameters
RP3 = 0
RP2 = 12.45
Parameter 23
RP1 =
+ 0003.45
Program
Source
Function
Parameter
Invert
Clear TOT
Update TOT
Te s t
Parameter to be edited
Selection of digit position
Modifying sign and number
For RP1 steps back to "Pro
g
rammin
g
" sub-menu,
for RP2 and RP3 steps back to the previous parameter
Accepts parameter change and steps to the next,
pressin
g
for RP3, values of RP1...RP3 are loaded to the
memory and steps back to "Programming" sub-menu