NIVELCO MultiCONT - Rounding; Stepping

prw2101a0600p_01  42 / 105
5.4.3.2 Rounding
The MultiCONT by default rounds to 4 decimal digits i.e., the quantity is displayed with precision of 4 decimals.
The rounding is for the main image quantity only.
SE360 59
No
x.xxx
x.xx
x.x
1: SE380
2: SE360
3P8
:
x: ST340
: S 3 0
Rounding 70
:
Source
Rounding
Step
Main display 55
:
5.4.3.3 Stepping
Stepping is related to the display only. The query of the transmitters and the control of the relays and current outputs operates constantly, depending on the cycle
time set in the background ( „Main menu”/”MultiCONT config.”/”HART”/”Cycle time”).
Source
Rounding
Step
Main display 55
:
Step 48
Manual
Auto step 5s
Auto step 10s
Polled
:
manual stepping of the devices on the display using and
automatic stepping at 2 different speeds
refreshes the display after quering the device