NIVELCO MultiCONT - Description; Message; Polling Address

prw2101a0600p_01  47 / 105
5.4.6.2 Polling Address
If multiple MultiCONT-s are to be connected to a single system via RS485, then this address differentiates them.
Polling address 54
00
5.4.6.3 Message
An arbitrary message (usually related to the operation, and max 32 characters) can be assigned to a device.
To change rows use „OK” and „ESC”.
Message 54
MULTICONT PROCESS
CONTROLLER
5.4.6.4 Description
An arbitrary text that can be assigned to a device ( max 16 characters )
Description 54
MULTICONT P-100