NIVELCO MultiCONT - Properties of the Selected Relay

prw2101a0600p_01  70 / 105
5.7.2. Properties of the selected relay
The refreshing of “Cycle”, “Workking”, “Input” and “Output” takes place continuously in the case of the internal relays.
01: R1_IN 19
Program
Short TAG
Info
Short TAG
R_IN_1
25
Cycle:
Working:
Input:
Output:
ID:
Parent:
Location:
1789
67
0.589
BE
9729718161
9728718160
Internal
Info
74
Number of state changes of the relay
The ener
g
isation and release are each considered a different state
Relay energisation time
The value that the relay state was calculated from
(if RP1...RP3 are known)
Actual state of the relay
Relay ID number
In case of an internal relay, the
[ h ]
MultiCONT's ID,
if not then the module's ID
Location of the relay (Internal=in MultiCONT,
External=in an external module)