8 Configuring Network Access
108 Nokia IP40 Security Platform User’s Guide v1.1
Viewing and Editing Users
You can view and edit users with IP40 Satellite X only.
To view or edit users
1. Click Users on the main menu.
The Users page appears.
2. Click Edit against the user you want to edit.
The Edit User page appears with the user's details. The options that appear on the page
depend on the software and services you are using.
3. To edit the user's details, do the following:
a. Edit the fields with the help of Table 20 on page 108.
b. Click Apply.
The changes are saved.
4. To return to the Users page without making any changes, click Cancel.
Table 20 gives details about the Editing User fields.
.
Table 20 Edit User Page Fields
Field Action
Username Enter a username for the user.
You cannot change the admin user's
username.
Password Enter a password for the user. Use five to
twenty-five alphanumeric characters (letters
or numbers) for the new password.
Confirm Password Re-enter the user’s password.
Administrator
Level
Select the user’s level of access to the Nokia
IP40 portal.
The levels are:
No Access: the user cannot access the IP40.
Read/Write: the user can log on to the IP40
and modify system settings.
Read Only: the user can log on to the IP40,
but cannot modify system settings. For
example, you could assign this administrator
level to technical support personnel who
need to view the event log.
The default level is No Access.
The admin user’s administrator level (Read
or Write) cannot be changed.
To Next Page
Loading...
