Nokia IP40 - Logging off from Nokia IP40 Security Platform

Making Initial Nokia IP40 Security Platform Settings
Nokia IP40 Security Platform User’s Guide v1.1 51
To access the IP40 through HTTPS from the Internet
1. To access the IP40 locally, enter https://my.firewall in the address bar of your browser (the
URL starts with https, not http).
2. The IP40 welcome page appears.
To access the Nokia IP40 Security Platform from a remote location
1. Enter https://<external IP address of IP40>:981 in the address bar of your browser.
Note
The URL starts with https, not http.
If you are accessing the Nokia IP40 Security Platform for the first time, the security
certificate in the IP40 is not yet known to the browser, so a security alert appears.
2. Click Yes to install the security certificate of the IP40 that you are trying to access. If you are
using Internet Explorer 5.0 or later, do the following:
a. Click View Certificate.
The Certificate information window appears, with the General tab displayed.
b. Click Install Certificate.
The Certificate Import Wizard opens.
c. Click Next.
The Certificate Store appears.
Select Automatically select the Certificate Store based on the type of certificate.
d. Click Next.
Completing the Certificate Import Wizard message appears.
e. Click Finish.
The Root certificate Store message appears.
f. Click Yes.
The certificate is installed.
Logging Off from Nokia IP40 Security Platform
Logging off terminates the Nokia IP40 Security Platform session. To connect to the IP40 again,
enter the password.
To log off from IP40, perform one of the following procedures:
 If you are connected locally, click Logout.
The Logout window appears.