Nokia IP40 - Viewing SNMP Parameters

9 Configuring and Monitoring SNMP
122 Nokia IP40 Security Platform User’s Guide v1.1
Use the following commands to set the SNMP parameters:
set snmp
contact - SNMP Contact
enable - Enables SNMP Daemon
location - SNMP Location
port - SNMP Port
trapPduAgent - snmp trappduagent
trapreceiver - snmp Trapreceiver
traps - SNMP Traps
Viewing SNMP Parameters
Use the following commands to view the SNMP parameters:
show snmp
community - SNMP Community
contact - SNMP Contact
enable - Displays SNMP Daemon
location - SNMP Location
port - SNMP Port
trapPduAgent - snmp trappduagent
trapreceiver - snmp Trapreceiver
traps - SNMP Traps
For additional and detailed information on how to use the set and show commands, see the
Nokia IP40 Security Platform CLI Reference Guide Version 1.1.