Nokia IP40 - 2 Installing Nokia IP40 Security Platform; Pre-installation Checks and TCP;IP Setup

Nokia IP40 Security Platform User’s Guide v1.1 33
2 Installing Nokia IP40 Security Platform
2 Installing Nokia IP40 Security Platform
This chapter describes how to set up and install the Nokia IP40 Security Platform in a
networking environment. The chapter covers the following topics:
 Before You Install Nokia IP40 Security Platform
 Setting Up Nokia IP40 Security Platform with Microsoft Windows 98 or Millennium
Operating Systems
 Setting Up Nokia IP40 Security Platform With Microsoft Windows XP and 2000 Operating
Systems
 Setting Up Nokia IP40 Security Platform with an Apple Computer
 Connecting Nokia IP40 Security Platform to the Network
 Installing Your Network
Before You Install Nokia IP40 Security Platform
Before you connect and set up the Nokia IP40 Security Platform, you must check the following:
 Whether TCP/IP is installed on your computer.
 The TCP/IP settings of your computer, to ensure that it obtains its IP address automatically.
The following sections guide you through the TCP/IP setup and installation process.
Setting Up Nokia IP40 Security Platform with
Microsoft Windows 98 or Millennium Operating Systems
If you are using Windows 98 or Windows Me, configure TCP/IP as follows.
To check for TCP/IP Installation
1. Choose Start > Settings > Control Panel.
The Control Panel window appears.