Configuring Remote Access VPNs
Nokia IP40 Security Platform User’s Guide v1.1 169
d. Enter the shared secret to use for secure communications with the VPN site.
This shared secret is a string used to identify the VPN sites to each other. The secret can
contain spaces and special characters.
e. Click Next.
7. If the Route All Traffic option is selected, you are ready to complete your VPN site. See
Completing Site Creation on page 169, to continue.
Completing Site Creation
When you configure a VPN site, the Site Name dialog box appears.
To complete VPN site creation
1. Enter a name for the VPN site. You may choose any name.
2. Click Next.
The VPN Site Created window appears.
a. Enter the Site name
b. If the Keep Alive Option is selected enter the Host IP address.
The connection is kept active by sending packets to the IP address that you enter.
3. Click Finish.
The VPN Sites page reappears. If you added a VPN site, the new site appears in the VPN
Sites list. If you edited a VPN site, the modifications are reflected in the VPN Sites list.
Note
You can see the downloaded topology on your IP40 device from http://my.firewall/
vpntopo.html
Deleting a VPN Site
You can delete a VPN site from the IP40 Tele 8 and IP40 Satellite X.
To delete a VPN site
1. Click VPN on the main menu.
The VPN Server page appears.
2. Click VPN Sites.
The VPN Sites page appears with a list of VPN Sites.
To Next Page
Loading...
