Nokia IP40 Security Platform User’s Guide v1.1 111
Access Control
You can set access control to your Nokia IP40 Security Platform.
To set the access control
1. Click Setup on the main menu.
The Firmware page appears.
2. Select Management.
The Management window appears.
Shared Secret Type the shared secret to use for secure communication with the
RADIUS server.
Administrator
Level
Select the level of access to the IP40 portal to assign to all users
that the RADIUS server authenticates. The levels are:
No Access: The user cannot access the IP40.
Read/Write: The user can log on to the IP40 and modify system
settings.
Read Only: The user can log on to the IP40, but cannot modify
system settings.
The default level is No Access.
Web Filtering
Override
Select this option to allow all users authenticated by the RADIUS
server to override Web filtering.
This option appears only if the Web filtering service is defined.
Table 21 RADIUS Page Fields
Fields Action
To Next Page
Loading...
