8 Configuring Network Access
112 Nokia IP40 Security Platform User’s Guide v1.1
3. Select (Access from) from the drop-drown list for HTTPS, SSH, and SNMP Access control.
You can select one of the following:
Internal Network—you can access the device only when you are within a LAN.
Internal Network +VPN—you can access the device when you are in a LAN or
connected through VPN.
IP Address Range—only specified computers with a given IP address range can access
the device.
ANY—you can access the device from any location.
Telnet Access
Note
Telnet access is disabled by default. To allow Telnet access from the LAN, WAN, and DMZ,
configure separate user rules.
For more information about Telnet access to Nokia IP40, see “Using Telnet to Connect to Nokia
IP40 Security Platform” on page 60
Secure Shell
Nokia IP40 supports SSH 2.0. The SSH feature in IP40 provides secure remote access to the
appliance. In addition, SCP is supported to enable secure upgrade of the device, downloading of
public keys, HTTPS certificates, import and export features.
Configuring SSH
To start using SSH remotely, first set IP40 to accept requests from SSH clients.
To enable IP40 to accept SSH requests
1. On the main menu, click Setup
The Setup window appears
2. Click the Management tab.The Management page appears.
To Next Page
Loading...
