Nokia IP40 - Page 146

12 Configuring Device Functions
146 Nokia IP40 Security Platform User’s Guide v1.1
To import the Nokia IP40 Security Platform configuration
1. Click Setup in the main menu, and click the Tools tab
The Tools page appears.
2. Click Import.
The Import Settings page appears.
3. Do one of the following:
 In the Import Settings field, type the full path to the configuration file.
or
 Click Browse, and browse to the configuration file.
4. Click Upload.
A Confirmation message appears.
5. Click OK.
IP40 settings are imported.
A success message appears.
6. Click OK.
The Tools page reappears.
Note
You can use the HTTP, TFTP, FTP, SCP protocols through the IP40 CLI for configuration
export and import. For additional information, see Nokia IP40 Security Platform CLI
Reference Guide, Version 1.1.