Nokia IP40 - Page 93

Nokia IP40 Security Platform User’s Guide v1.1 93
To edit a static route
1. Click Network in the main menu, and click the Static Routes tab.
The Static Routes page appears, with a listing of existing static routes.
2. To edit the route details, do the following:
a. Click New Route at the bottom of the window.
The Edit Route page appears, displaying the destination network, subnet mask, and gateway
IP of the selected route.
b. Edit the fields by using the information inTable 16 on page 92.
c. Click Apply.
The changes are saved.
To delete a static route
1. Click Network in the main menu, and click the Static Routes tab.
The Static Routes page appears, with a listing of existing static routes.
2. In the desired route row, click the Erase tab.
A confirmation message appears.
3. Click OK.
The route is deleted.
Gateway IP Type the IP address of the gateway (next hop router) to which to
route the packets destined for this network.
Metric Enter the metric value. Route with a lower metric value is
preferred.
Table 16 Edit Route Page Fields
Field Action