Nordson AltaBlue - Electrical Enclosure Panel Assemblies

Parts
9-52
Part 1120130
E 2011 Nordson Corporation
Electrical Enclosure Panel Assemblies
The electrical enclosure panel assembly parts vary depending on the size of
the melter: one/two‐pump, three/four‐pump. Refer to the correct parts lists for
your melter.
400V Melter Left Panel
See Figure 9‐32.
Item Part Description Quantity Note
  Panel Assembly,LH, with LK,400V, Touch —
1  S Panel, Left, Outside, Electrical Cabinet, with LK 1
2  S Panel, Left, Inside, Electrical Cabinet, Touch 1
3  S Stock WireWay 45X65 ALTABLUE 0.33
4  S Stock WireWay 45X65 ALTABLUE 0.28
5  S WireWay,25X65X180,ALTABLUE 1
6  S Stock WireWay 25X65 ALTABLUE 0.22
7  S Washer, FLT, M, REG, M3, Zinc Plate 10
8  S Washer, LK, M, SPT,M3, STL, ZN 10
9  S Nut, Acorn, M3, STL, ZN 10
10  S DIN Rail, 280 LG 1
11  S Hex nut, Flanged, Serrated, M5 8
12 7400378 S Main switch, 100 A, 3 pole 1
13 7401321 S Service Kit, Filter, Fan, Electrical Cabinet 1
14 7403070 S Main Contactor DILM40C 1
15 7400482 S RC suppressor, 110−250 VAC 1
16 254244 S Circuit breaker 50A 3pole FAZB50/3 1
17 7403519 S Terminal Block, Power Distribute, 400V, AT 1
18  S End Stop, Terminal Block 4
19  S Spacer Sleeve, ALTABLUE 5
20  S Hex nut, Flanged, Serrated, M6 5
21  S Panel, Cover, Filter 1
22 7400369 S Lockout Switch 63A 3POLE 600V 1
NOTE A: Present only on melters with the optional lockout switch.