Parts
9-4
Part 1120130
E 2011 Nordson Corporation
Frame Assembly
The frame assembly parts vary depending on the size of the melter:
one/two‐pump or three/four‐pump. Refer to the correct parts list for your
melter.
One/Two‐Pump Melter Frame Parts
See Figure 9‐1.
Item Part Description Quantity Note
Module, Common,15/30L, 2D, AT
901 S Panel Assembly,Tank Side,15 AND 30 Liter 2
902 S Panel Assembly,Motor Cover,Side 2
903 S Panel Assembly,Motor Cover Front 1
904 S Panel Assembly ,Electrical Cover Front 1
906 S Rivet, Pop, 1/8X.187,BLK,ALUM 8
907 S Plug, Button, M32, Plastic 1
908 S Plate Stamping,160X55 1
913 7403418 S Kit ,Ship with, 2D, ALTA BLUE Touch 1
914 7400868 S Cable Gland, Clamp, M32, 1522mm 1
917 S Plug, Dome, 22.2, Nylon 66, BLK 2
919 S Plug, Button M40, Plastic 1