About the Touch Screen Display and User Interface
4-5
Part 1120130
E 2011 Nordson Corporation
About the Operator Display
Use the Operator Display to manage zones and pumps, as well as access
the system Master Controls.
Color Description
Main Display
Monitor Display Anywhere on the display
Touch any zone to:
*Enable/Disable
*Modify its setpoint
temperature
Touch any Pump to:
* Enable/Disable
* Adjust its RPM
* Modify its Operation Mode
Touch any Master Control
(Heaters, Pumps and Standby)
to switch them On/Off
Figure 4‐3 The Operator Display
To Next Page
Loading...
