Parts
9-68
Part 1120130
E 2011 Nordson Corporation
Two Hose/Gun (400V) Melter Right Panel Parts
See Figure 9‐40.
Item Part Description Quantity Note
Panel assy, RH, 2H/G, 400V, touch
1 S Panel,right inside,elect cab,touch 1
2 S Wireway, 25x50x490 1
3 S Wireway 25x50x290 3
4 S Stock, wireway, 25x50, pearl 0.19
5 S Washer, flt, M, reg, M3, zinc plate 15
6 S Washer, lk, M, spt, M3, stl, zn 15
7 S Nut, acorn, M3, stl, zn 15
8 S Terminal block, RH, 400V, AT 1
9 S Terminal block, ground, AT 1
10 S Hexnut, flanged, serrated, M5 10
15 S This item number is reserved
16 7401320 S Service kit, fan, 240VAC, 170 CFM 1
17 7401321 S Service kit, filter, fan, elect. cab 1
18 S Screw, shcs M4 X 45 GD 8.8 ZP 2
19 S Panel, cover, filter 1
20 S Hexnut, flanged, serrated, M6 4
21 S Spacer sleeve, AltaBlue 4
22 S Panel, right, outside, elect cab
23 S This item number is reserved
24 S Insert, female, 16 pin, 116, cage clamp 1
25 S Insert, female, 16 pin,17132, cage clamp 1
26 S Connector housing, base, 32 pin, w/cover 1
27 S Scr, pan, rec, M4X16 4
28 S Washer, flt, M, narrow, M4, stl, zn 4
29 S Washer, lk, M, spt, M4, stl, zn 4
30 S End stop, terminal block
31 7403256 S 24VDC power supply, 150W 1
32 S Rail, din, 280lg, AltaBlue 1