Operating the Melter
5-7
Part 1120130
E 2011 Nordson Corporation
Master Heater
Master Pump
Master Manual Standby
Reserved for
future functionality
The following table describes what each Master Control color state indicates.
Color State
Dark Blue On
White Off
Light Blue
Auto On (Master Pump only)
Gray Not available
NOTE: Auto On is a special state reserved only for the Master Pump
Control button.
NOTE: Using the standby mode during periods of time when the melter is
inactive conserves energy by reducing all internal and external heated zones
by 50C (90F).
To Next Page
Loading...
