Nortec UL60 - I-Charge Functionality

9 Tabular overview of the program procedures I-Charge
104 © Nortec Electronics 2018
9.6 I-Charge
With the help of program “P5: I-Charge” individual charging programs can be started.
Charging time span and final charging voltage free selection possible.
Example: NiCd battery
Enter:
1.55 V shut down voltage
maximum 1:00 hour charging time span
20: NiCd battery (manufacturer independent)
P520: PARAMETER INPUT
MAX. CHARGE TIME 01:00 H
20: NiCd battery (manufacturer independent)
P520: PARAMETER INPUT
MAX. VOLTAGE/CELL ? 1.55 V/C
================================
COPYRIGHT NORTEC
2014-15 UL60 V 1.0 16.06.15
SN: 160001
--------------------------------
DATE: 28.06.15
BATTERY NO:
OPERATOR NO:
NOM. VOLTAGE: 24.00 V
RATED CAP: 040.0 Ah
PROGRAM: 520
NiCd battery
I-Charge
--------------------------------
PROGRAM START 10:38:02
VOLTAGE = 25.41 V
--------------------------------
P520:S1: 11:35:53
I-CHARGE
VOLTAGE = 31.00 V
CURRENT = 40.01 A
CAPACITY = 38.07 Ah
= 096 %
TIME = 057 MIN
--------------------------------
PROGRAM AUTOMATICALLY FINISHED
================================

================================
COPYRIGHT NORTEC
2014-15 UL60 V 1.0 16.06.15
SN: 160001
--------------------------------
DATE: 28.06.15
BATTERY NO:
OPERATOR NO:
NOM. VOLTAGE: 24.00 V
RATED CAP: 040.0 Ah
PROGRAM: 520
NiCd battery
I-Charge
--------------------------------
PROGRAM START 10:38:02
VOLTAGE = 25.41 V
--------------------------------
P520:S1: 11:38:03
I-CHARGE
VOLTAGE = 30.55 V
CURRENT = 40.01 A
CAPACITY = 40.00 Ah
= 100 %
TIME = 060 MIN
--------------------------------
PROGRAM AUTOMATICALLY FINISHED
================================












Termination because shut down
voltage has been reached.
Termination because maximum
charging time span has been
reached.