6 Handling Network printer
28 © Nortec Electronics 2018
6.6 Network printer
The UL60 can be configured to secure that after the end of the program the printer starts and you
get a print on the network printer automatically. The print complies with the stored .rtf-file (see 6.3,
page 24). Activate the printer via menu. Adjust Ethernet IP-address (see 7.2, page 34)
Nortec Electronics
protocol
NORTEC
2014-15 UL60 V 1.0 16.06.15
SN: 160001
--------------------------------
DATE: 18.06.15
BATTERY NO:
OPERATOR NO:
NOM. VOLTAGE: 24.00 V
RATED CAP: 006.0 Ah
PROGRAM: 020
NiCd battery (manufacturer inde-
pendent)
DISCHARGE
--------------------------------
PROGRAM START 12:33:58
VOLTAGE = 27.19 V
--------------------------------
P020:S1: 12:56:16
DISCHARGE
VOLTAGE = 26.18 V
CURRENT = 05.99 A
CAPACITY = 2.2 Ah
= 36.6 %
TIME = 22 MIN
--------------------------------
PROGRAM MANUALLY FINISHED
================================
V
30 150
28.0
20.0
24.0
Discharge
All printers with PCL5 and TCP-IP-connection 9100 direct mode can be used, which means almost
all network compatible laser printers.
To Next Page
Loading...
