Nortec UL60 - Program 510: I-Charge Pb Battery Sealed MIL; Program 511: I-Charge Pb Battery Sealed Commercial; Program 516: I-Charge Pb Battery Vented Commercial; Programm 520: I-Charge Nicd Battery (Manufacturer Independent)

9 Tabular overview of the program procedures I-Charge
© Nortec Electronics 2018 105
9.6.1 Program 510: I-Charge Pb battery sealed MIL
9.6.2 Program 511: I-Charge Pb battery sealed commercial
9.6.3 Program 516: I-Charge Pb battery vented commercial
10: Pb battery sealed MIL
 select Batteryprocessing: 
P5: I-Charge
Enter:
 Nominal voltage
 Rated capacity
 Charging current
 Charging time span
 Switch off voltage of each cell
Step 1:
I-Charge with entered charging current for the input time span. If shut down voltage is reached the
program will be terminated.
End of program
9.6.4 Programm 520: I-charge NiCd battery (manufacturer independent)
20: NiCd battery (manufacturer independent)
 select Batteryprocessing: 
P5: I-Charge
Enter:
 Number of cells
 Rated capacity
 Charging current
 Charging time span
 Switch off voltage of each cell
Step 1:
I-Charge with the entered charging current for the input time span.
If the shut down voltage is reached the program will be terminated.
End of program