Nortec UL60 - Device Handling and Operation

6 Handling General handling instructions
© Nortec Electronics 2018 21
6 Handling
6.1 General handling instructions
6.1.1 Display
The display of the UL60 is divided into 3 display sections:
Section 1 (first 2 lines):
Display of battery type and type of treatment
Section 2 (3.-4. lines):
Status of program
This line displays the status of the device in general.
This could be: PROGRAM SELECTION, PROGRAM START, PROGRAM END.
Status
The information displayed shows the program step with description of the running routine.
Time
The time is displayed in the following order: hour : minute : second
Input, information or transaction parameter
In this section, all selections or parameter are shown in time such as:
 Parameter- or program selection
 Error messages
 Operating parameter (current, voltage and so on) during battery threatment process
 Information about menu process, temperature display
section 1
section 2
section 3