EasyManua.ls Logo

Nortec UL60 - Work with Lead Batteries

Nortec UL60
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 Program selection Battery data entry
© Nortec Electronics 2018 41
8.4.3 Work with lead batteries
All battery types starting with 1x respond. In particular, these are:
Type 10: Lead acid battery sealed MIL
Type 11: Lead acid battery sealed commercial
Type 12: Valve regulated lead acid aircraft battery
Type 16: Lead acid battery vented commercial
Type 17: Lead acid battery MIL P3-C Orion
Type 19: Lead acid battery (free input)
Choose the type using the following keys
and confirm with pressing the key afterwards select kind of treatment.
For example, select the charging of a military sealed lead battery:
Use this key to get to the desired kind of treatment and confirm by pressing the key
On dispay you will see:
10: Pb battery sealed MIL
P410: Please enter parameter:
RATED VOLTAGE: 00.00 V
Enter the nominal voltage of the battery. You find it on the identification plate of the battery.
NOTE:
Lead batteries usually consist of several cells of 2
V each.
Commercially common:
2
V
cells
6
V
batteries
12
V
batteries
24
V
batteries
The device only accepts 2.0
V and the multiple. All other entry will be rejected as defective.
Confirm the entered voltage by pressing . The display shows:

Table of Contents

Related product manuals