9 Tabular overview of the program procedures
112 © Nortec Electronics 2018
Step 6:
Discharging with C
1
until a voltage of 1 V for each cell is reached.
End of program
Delivery of battery:
Battery must rest for 8 hours. Afterwards start P1 Initial operation with parameter 7 hours.
Time monitoring:
Discharging with C
1
maximum 90 minutes, discharging with C
10
maximum 180 minutes.
ATTENTION:
The user has to wait for 8 hours after the end of the program until the program initial operation with
the parameter 7 hours can be started.
To Next Page
Loading...
