NuWave BRIO 6Q - Sear 1 & 2 Operation

nuwavenow.com
25
ENGLISH
nuwavenow.com
25
5. Press the START/PAUSE button to begin cooking. The
LED display will show sear 1 (ashing), 2, time, and the
set sear 1 time with the “:” ashing.
6. Once the Sear 1 cycle is complete the unit will beep
one (1) time and automatically go into regular stage
cooking. The LED display will show sear 2 , time, and
the set regular stage cooking time (00:15 default) with
the “:” ashing.
7. Once the stage cooking cycle is complete the unit will
beep one (1) time and automatically go into sear 2
cooking. The LED display will show sear 2 (ashing), time,
and the set sear time (00:05 default) with the “:” ashing.
8. When the unit is nished cooking the LED display will
show End and beep three (3) times.
Sear 2
Default sear 2 temperature is 400F and default sear 2
time is ve (5) minutes (00:05).
1. Press the ON/OFF button and adjust your cooking
temperature and time for stage 1 cooking.
2. Press the SEAR button three (3) times. This will engage
the sear 2 function.
3. The LED display will show 400F, sear, 2 (ashing),
and temp.
• Sear 2 searing temperature can be adjusted by using
the [↑] and [↓] buttons above and below the temperature
icon. 400F is the maximum searing temperature.
• Adjust the sear 2 time by using the [↑] and [↓]
buttons above and below the time icon up to ve (5)
minutes (00:05).
4. Press the START/PAUSE button to begin cooking.
5. Once the stage cooking cycle is complete the unit will
beep one (1) time and automatically go into sear 2
cooking. The LED display will show sear 2 (ashing),
time, and the set sear time (00:05 default) with the “:”
ashing.
6. When the unit is nished cooking the LED display will
show End and beep three (3) times.