instructions
26
INSTRUCTIONS
26
WARM
1. Press the WARM button to engage the warm function
and keep your food warm after cooking until you’re ready
to serve.
2. The LED display will show 145F, temp and warm.
3. Use the [↑] and [↓] buttons above and below the
temperature icon to adjust the warm temperature.
4. Press the [↑] and [↓] buttons above and below the time
icon to adjust the warm time. The LED display will show
01:00 (default), time and warm.
5. Use the [↑] and [↓] buttons above and below the time
icon to adjust the warm time.
6. Press the START/PAUSE button to start cooking. The
unit will go through the regular stage cooking cycle then
will go into warm at the temperature set as well as the
set time.
Using Warm as an Independent Function
1. Warm can be used as an independent function. Press
and hold the WARM button for two (2) seconds.
2. The unit will automatically begin the warming function
and the LED display will show 01:00, time and warm.
3. Warm temperature and time can be adjusted at this time
by using the [↑] and [↓] buttons.
4. When the warming time runs out, the LED display will
show End and will beep three (3) times.
Notes:
• Warm temperature can only be adjusted up to 200F.
• Warm can be used with the program options as well.
Simply choose the program number and press the
WARM button and adjust warm temperature and time.
• To cancel the warm function at any time simply press
the WARM button. Warm will no longer be lit in the
LED display.
To Next Page
Loading...
