nuwavenow.com
27
ENGLISH
nuwavenow.com
27
PROGRAM
The PROGRAM button represents Memory Entry
(the storage of frequently used cooking sequences)
and Memory Recall (retrieval of cooking sequences).
Program slots number 1~100 are designated for preset
programs. Slots 101~200 are for your own unique
programs. The unit comes with 100 pre-programed
cooking recipes along with an additional 100 memory
slots to add your own unique recipes the way you like
them cooked.
Memory Recall
Press the PROGRAM button. The LED display will show
prog and 1.
1. Use the [↑] and [↓] buttons to choose the desired
program number to recall. Either set of [↑] and [↓]
buttons (temperature icon or time icon) to scroll through
the program numbers.
2. Once the program number is chosen, press the
START/PAUSE button to begin cooking. You can make
temperature and time adjustments if desired.
3. The unit will cook at the programmed settings.
Program Your Own Recipe Before Cooking
1. Set your cooking parameters using DELAY, PREHEAT,
SEAR 1, STAGE (1~5), SEAR 2 and/or WARM.
2. Press the PROGRAM button. The LED display will show
prog and 101.
3. Use the [↑] and [↓] buttons to choose the desired
program number to save the program to (101~200).
4. Press the PROGRAM button again to store and save the
program to your chosen program number. The program
is now stored and available for future recall.
5. Press the START/PAUSE button to begin cooking
the program.
Program Your Own Recipe During Cooking
1. Set your cooking parameters using DELAY, PREHEAT,
SEAR 1, STAGE (1~5), SEAR 2 and/or WARM.
2. Press the START/PAUSE button to begin cooking.
3. During cooking, press the PROGRAM button. The LED
display will show prog and 101.
To Next Page
Loading...
