instructions
28
INSTRUCTIONS
28
4. Use the [↑] and [↓] buttons to choose the desired
program number to save the program to (101~200).
5. Press the PROGRAM button again to store and save the
program to your chosen program number. The program
is now stored and available for future recall.
6. The unit will continue to cook the recipe programmed.
Program Your Own Recipe After cooking
1. Set your cooking parameters using DELAY, PREHEAT,
SEAR 1, STAGE (1~5), SEAR 2 and/or WARM.
2. Press the START/PAUSE button to begin cooking.
3. When the cooking process is nished, and the LED
display shows End, press the PROGRAM button. The
LED display will show prog and 101.
4. Use the [↑] and [↓] buttons to choose the desired
program number to save the program to (101~200).
5. Press the PROGRAM button again to store and save the
program to your chosen program number. The program
is now stored and available for future recall.
View Current Program During Cooking
You can view the currently cooking program number while
the program is running.
1. During cooking, press and hold the PROGRAM button.
2. The LED display will show the currently running program.
3. Release the PROGRAM button to see the previous
screen on the LED display.
View Program Cooking Functions
You can view all cooking functions associated with a
program before or during the cooking process.
1. View Before cooking
• Press the PROGRAM button and nd the program
number to review using the [↑] and [↓] buttons.
• Once the program number shows in the LED display,
press the STAGE button to review each phase of
cooking.
Example:
• Use the [↑] and [↓] buttons until you reach the program
number, as an example we will use #114.
To Next Page
Loading...
