instructions
30
INSTRUCTIONS
30
• Press the PROGRAM button again to save and store
the edits.
2. Edit During Cooking
• During cooking, press the STAGE button until the
function you would like to edit shows in the LED display.
• Use the [↑] and [↓] buttons to adjust the cooking
temperature and time.
• If there are more cooking functions that you would like
to edit, press the STAGE button until you reach the
function you would like to edit and make the changes.
• The unit will continue the cooking process with the
edits that you have made.
Note: Functions that have already ended in the cooking
cycle cannot be edited.
• When cooking has finished, the unit will beep three
(3) times and the LED display will show End followed
by SAVE.
Note: Save indicates there has been a change in the
program settings during cooking.
3. If you have already saved the changes to a program
number during cooking, there is nothing more you need to
do. The edited program is available for further recall.
4. If you have not saved the changes to a program number
by the time cooking nishes, the Brio will remind you that
changes have been made by displaying SAVE, and allow
you to save the changes at this point.
• Press the PROGRAM button. The LED display will
show prog and 101.
• Use the [↑] and [↓] buttons to nd the program number
to save your edits to.
• Press the PROGRAM button again to save and store
the edits.
Note: If you save any recipe to an already lled memory slot,
the new recipe will override the previous recipe. Any edits to
a preset program (1~100) can only be saved and stored into
program numbers 101~200. You cannot save an adjusted
preset program to its original preset program number.
To Next Page
Loading...
