nuwavenow.com
31
ENGLISH
nuwavenow.com
31
PROBE
Use the Digital Temperature Probe to accurately cook to
your preferred internal temperature. To use the probe,
connect the probe to the unit.
1. Set your cooking functions and stages as desired.
2. Press the PROBE button. The LED display with show
current probe temperature, temp, and probe.
3. Press and hold the PROBE button for 2 seconds.
The LED display will show probe, 160F (target probe
temperature default), and temp.
4. Use the [↑] and [↓] buttons above and below the
temperature icon to set the target probe temperature
(the internal temperature you want the food to reach
during cooking), up to 210F.
5. Insert the pointed end of the probe into the food to be
cooked and place food in the unit.
6. Press the START/PAUSE button to begin cooking. The
LED display will show the current probe temperature,
temp, and probe.
• To see the current cooking temperature, press the [↑]
or [↓] button above or below the temperature icon. This
will show you current cooking temperature.
• To go back and see the current probe temperature,
press the PROBE button.
• To see the target probe temperature, press and hold
the PROBE button for two (2) seconds. You can adjust
the target probe temperature by using the [↑] and [↓]
buttons above and below the temperature icon.
7. The unit will cook until the current probe temperature
reaches the set target probe temperature. For example,
if you want to cook your chicken to 170F, set the target
probe temperature to 170F.
8. Once the target probe temperature is reached, cooking
will stop, and the LED display will show End.
To Next Page
Loading...
