NXP Semiconductors PN76 Series - Page 57

NXP Semiconductors
AN13134
PN76 family evaluation board quick start guide
Contents
1 Introduction ......................................................... 3
1.1 PN76 family registers and EEPROM
concept .............................................................. 3
1.2 System overview ............................................... 4
1.2.1 PN76 and OpenSDA ......................................... 4
1.2.2 PN76 and external debugger .............................4
1.2.3 PN76, LPC55, and external debugger ...............5
2 Hardware .............................................................. 7
2.1 PNEV7642A Rev-B ............................................7
2.1.1 Power supply ..................................................... 8
2.1.1.1 Power supply selection ......................................9
2.1.1.2 Power jack ....................................................... 10
2.1.2 Debug interfaces ............................................. 11
2.1.2.1 JTAG/SWD interface ........................................11
2.1.2.2 OpenSDA interface ..........................................13
2.1.3 Antenna ............................................................14
2.1.4 Jumper settings ............................................... 14
2.1.4.1 Host interface selection ................................... 14
2.1.4.2 IOREF .............................................................. 15
2.1.4.3 LED control J63 and J64 .................................16
2.2 LPC55S16 host MCU ...................................... 17
2.2.1 USB connections ............................................. 18
2.3 Connecting the LPC with the PN76 ................. 19
2.4 TDAEV8035 ..................................................... 24
2.4.1 Stacking of boards ...........................................24
2.4.2 Jumper settings ............................................... 25
3 Software ............................................................. 26
3.1 MCUXpresso SDK ........................................... 26
3.2 Host software (LPC55S16) ..............................27
3.2.1 Import projects .................................................27
3.2.2 Secure firmware download .............................. 28
3.2.2.1 Edit firmware location ...................................... 28
3.2.2.2 Run firmware update ....................................... 29
4 Development environment ............................... 31
4.1 MCUXpresso environment ...............................31
4.1.1 MCUXpresso IDE ............................................ 31
4.1.1.1 Install IDE ........................................................ 31
4.1.1.2 Install SDK .......................................................31
4.1.2 Import SDK example ....................................... 33
4.1.3 Build example .................................................. 36
4.1.3.1 Flash example ................................................. 38
4.1.3.2 Debug example ............................................... 41
4.1.4 Bin file generation ............................................42
5 NFC Cockpit ...................................................... 44
5.1 Install NFC Cockpit ..........................................44
5.2 Install VCOM driver ......................................... 45
5.3 Flash NFC Cockpit firmware ............................45
5.3.1 Bring to mass storage mode ........................... 46
5.3.2 Flash NFC Cockpit firmware ............................46
5.4 NFC Cockpit usage ......................................... 47
6 Checklist ............................................................ 49
7 Troubleshooting ................................................ 50
8 Radio Equipment Directive (RED) ................... 51
9 References ......................................................... 52
10 Legal information .............................................. 53
Please be aware that important notices concerning this document and the product(s)
described herein, have been included in section 'Legal information'.
© 2023 NXP B.V. All rights reserved.
For more information, please visit: http://www.nxp.com
Date of release: 2 May 2023
Document identifier: AN13134