- 15 -
1. Basic Operations
Checking the Information of the Machine
Print the machine information and check the status. Press the (STATUS) button on
the operator panel to check the information such as remaining level of consumables.
• Printing a Report to Check
• Checking the Status on the Operator Panel
You can print and check the configuration or the job logs of this machine.
1
Press the (SETTING) button on the operator panel.
2
Check that [Reports] is selected, and then press the button.
3
Press the or button to select the category of the report you want to print
and press the button.
4
Press the or button to select the report to print and press the button.
If the administrator login screen is displayed, enter administrator password.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
5
Check that [Yes] is selected on the confirmation screen, and press the (OK)
button.
If you press the (SETTING) button on the operator panel and select [Admin Setup] > [Manage Unit] >
[System Setup] and then set [Allow All Reports To Print] to [Disable], log in as the administrator to print the
following reports.
• Scan To Log
• Speed Dial List
• Group List
• Fax Log
• Address Book
Printing a Report to Check
Item Description
Configuration Prints detailed settings of this machine.
To Next Page
Loading...
