- 267 -
9. Operating Management/ Specifications
Administrator Setup
This section describes how to change items in Admin Setup.
The settings that you can change in [Admin Setup] are as follows.
The factory default administrator password is "999999". If the administrator password is
changed, enter the updated password.
• Changing Administrator Settings
• Copy Setup
•Fax Setup
• FaxServer Function
• Internet Fax Setup
• Scanner Setup
• Print From USB Memory Setup
• Print Setup
• Network Menu
• Manage Unit
• User Install
To change the administrator settings, the administrator password is required. The factory
default administrator password is "999999".
If the administrator password is changed, enter the updated password.
1
Press the (SETTING) button on the operator panel.
2
Press button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select the item you want to change and press the
button.
5
Change the setting, and then press the (OK) button.
6
Press the button to display the previous screen.
If you have items to change, operate continuously.
When you change all the items, press the button to go back to the standby screen.
Changing Administrator Settings
To Next Page
Loading...
