- 154 -
5. Fax
If you have the sender (originator) name that is frequently used, it is recommended to specify
the name as the standard originator name.
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [User Install] and press the button.
5
Press the or button repeatedly to select [Standard TTI] and press the
button.
6
Select the sender ID to register, and then press the button.
7
Press the button until the home screen is displayed.
Disclosing a Sender Name (Originator) to the Recipient
Changing the Sender Name That is Printed on Faxes
• Registering a Prefix
• Using a Prefix When Sending a Fax
• Using a Prefix When Registering a Speed Dial Number
You can add a prefix to a destination number. You can also attach a prefix when registering a
number to speed dial.
Registering a Prefix
You must register the prefix to [Prefix] in advance. You can enter up to 40 digits.
You can use symbols, such as "#" or "*".
Entering Fax Number to Send a Fax (User's Manual)
1
Press the (SETTING) button on the operator panel.
2
Press the button once to select [Admin Setup] and press the button.
3
Enter the administrator password, and then press the (OK) button.
The factory default administrator password is "999999". If the administrator password is changed, enter the
updated password.
4
Press the button to select [Fax Setup] and press the button.
5
Press the button to select [Other Settings] and press the button.
6
Press the or button repeatedly to select [Prefix] and press the
button.
7
Enter a prefix.
8
Select [Enter], and then press the (OK) button.
9
Press the button until the home screen is displayed.
Changing the Standard Originator Name Adding a Prefix (Prefix)
To Next Page
Loading...
