- 220 -
7. Troubleshooting
• It takes a long time to start copying.
• A copy job is cancelled.
Other Problems (Copy)
Point to check Solution Reference
Is [Warming Up] or [Preparing]
displayed on the display screen on
the operator panel?
The machine is preparing.
Wait until the copy is started.
-
Point to check Solution Reference
Has any error occurred? A copy job is cancelled when a
specific error occurs while copying.
Clear the error, and then start
copying again.
Error Message List (User's
Manual)
Is there paper in the MP tray? When copying using paper from the
MP tray, check whether enough
paper is loaded in the MP tray before
starting copying.
Press the (SETTING) button
on the operator panel, select [Paper
Setup] > [Select Tray] > [Copy] > [MP
Tray], and then check that [ON] or
[ON(Prior)] is selected.
-
To Next Page
Loading...
