Oki MC363 Advanced Manual

- 402 -
11. Utility Software
You can register such as logos to the machine as forms, and then print overlays. This section
describes how to register forms.
• Creating a Form
• Registering the Form to the Machine Using Configuration Tool
About how to Print Overlays
Overlaying Forms or Logos (Overlay)
Creating a Form
1
Click [Start], and then select [Devices and Printers].
2
Right-click the printer icon, and then select the necessary printer driver from
[Printer Properties].
3
Select the [Ports] tab, select the [FILE] check box from [Port], and then click
[Configure Port].
4
Create a form to register on the machine.
If using the Windows PCL printer driver, proceed to step 9.
5
Select [Print] from the [File] menu.
6
Click [Preferences] (or [Properties]).
7
Select the [Extend] tab, and then click [Overlays].
8
Select [Create Form].
9
Start printing.
10
Enter the file name under which you want to save.
example : C: temp form.prn
11
Select the previous port from [Printer Port] on the [Port] tab, and then click
[OK].
Registering the Form to the Machine Using Configuration Tool
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select [Storage Manager] from the [Plug-ins] menu.
3
Click (New Project).
4
Click (Add File to Project), and then select a created form file.
The form is added to the project.
5
Click the form file.
6
For Windows PCL printer driver users, enter ID of the form (arbitrary) in [ID]
and click [OK]. For Windows PS printer driver users, enter the form name in
[Component], and then click [OK].
Do not change [Target Volume] and [Path].
For those who use the Windows PCL printer driver for overlay printing, specify the form ID entered in [ID], and
who use the Windows PS printer driver, specify the form name entered in [Component].
7
Select the machine from the bottom of the Storage Manager Plug-in window.
If the machine is not registered to Configuration Tool yet, register the machine referring "Registering This
Machine".
8
Click (Send project files to printer).
9
Click [OK].
Registering Forms (Form Overlay)

Oki MC363 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	LED
Fax Modem Speed	33.6 kbps
Monthly Duty Cycle	Up to 45, 000 pages
Duplex Printing	Yes
Weight	29 kg
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0, Ethernet, Wireless
Paper Capacity	250 sheets (standard tray)