Oki MC363 Advanced Manual

- 285 -
9. Operating Management/ Specifications
• Reset Settings*
2
• Job Log Setup
• Print Statistics
*1 A message is displayed to confirm the equipment restarts automatically when changes have been made. Select
[Yes] to continue. Select [No] to cancel.
*2 A message is displayed to confirm the equipment restarts automatically when executed. Select [Yes] to continue.
Select [No] to cancel.
*3 A message is displayed to confirm that all job logs are deleted when executed. Select [Yes] to continue. Select
[No] to cancel.
Item Factory default setting Description
Reset Settings*
2
- Deletes job macros, fax transmission /
reception data, and the history information,
and returns the settings to the default.
Item Factory default setting Description
Clear Job Log*
3
- Clears the saved job logs.
Item Factory default setting Description
Maintenance Counter Disable Sets whether to print the consumable
counter's report.
Reset Main Counter - Resets the main counter.
Reset Supplies Counter - Reset the consumable counter.
This item is displayed when [Maintenance
Counter] is set to [Enable].
User Install
Item Factory
default
setting
Description
Time Zone +00:00 Sets the time GMT zone.
Available range: -12:00 to +13:00 (15 minutes
/ increment)
Daylight Saving ON Sets whether to enable the Daylight Saving
mode.
Time Setup Auto Setup SNTP Server
(Primary)
Sets the SNTP server to use for setting the
current date and time. You can enter up to
64 characters.
SNTP Server
(Secondary)
Manual Setup 2001/01/01 0:00 Sets the current date and time manually.
Power Setup Auto Power Off Auto Config Sets the behavior of Automatic Power Off.
Power Supply Return State Continue Sets a power supply method at the time of
recovery from the power failure.
Select [Manual] if you do not want to make the
machine automatically to turn on after the
recovery.
Office Document Mode
(Except MC363)
Mode1 This mode allows to always enable the toner
save function.
To forcibly enter the machine in toner save
mode, select Mode2.
High Humid Mode OFF Sets whether to enable the humidity mode.
Selecting [Enable] reduces curl generated
while printing.
(MC363: On/Off only)
Quiet Mode
(Except MC363)
OFF Sets whether to reduce the printing noise.
Setting to [ON] affects printing speed.
Drum Near Life Timing 1000 Sets the timing for the near life warning for the
drum cartridges.
Fuser Near Life Timing 1000 Sets the timing for the near life warning for the
fuser unit.
Belt Near Life Timing 1000 Sets the timing for the near life warning for the
belt unit.
MF (Tone) / DP (Pulse) Tone Select a dial type.
Ton e
Pulse

Oki MC363 Specifications

General

Functions	Print, Copy, Scan, Fax
Print Technology	LED
Fax Modem Speed	33.6 kbps
Monthly Duty Cycle	Up to 45, 000 pages
Duplex Printing	Yes
Weight	29 kg
Print Resolution	1200 x 1200 dpi
Scan Resolution	Up to 600 x 600 dpi
Connectivity	USB 2.0, Ethernet, Wireless
Paper Capacity	250 sheets (standard tray)