- 412 -
11. Utility Software
You can register destination e-mail addresses in the address book on the machine and edit
them.
You can register up to 1000 e-mail addresses in the address book.
1
Click [Start], and then select [All Programs] > [Okidata] > [Configuration Tool] >
[Configuration Tool].
2
Select the machine from [Registered Device Table].
3
Select the [User Setting] tab.
4
Click [E-mail Address Manager].
5
Enter the administrator password, and then click [OK].
The factory default password is "999999".
6
Click (New(E-mail Address)).
Registering an E-mail Address (Configuration Tool)
To Next Page
Loading...
